- Home
- Equipment
- canada alberta
- programmable logic controller
Show results for
Refine by
Applications
- Waste Gas Incineration for the Air Pollution Treatment Industry
- Solid Waste Incineration for the Municipal Waste Industry
- Greasezilla solution for wastewater treatment plants sector
- Greasezilla solution for pumpers and haulers sector
- Greasezilla solution for biofuels sector
- Mobile Sewage Treatment for the Defense Industry
- Flow & energy management solutions for water & wastewater industry
- Flow & energy management solutions for HVAC & facility
- Flow & energy management solutions for oil and petrochemical industry
- Flow & energy management solutions for chemical industry
- Flow & energy management solutions for food and beverage industry
- Flow & energy management solutions for pharmaceutical & semiconductor industry
- Flow & energy management solutions for power & thermal plant sector
- Flow & energy management solutions for plant & machine
- Flow & energy management solutions for pulp & paper industry
- Flow & energy management solutions for vehicle and vessel sector
Programmable Logic Controller Equipment Supplied In Alberta
34 equipment items found
Manufactured by:Yokogawa Electric Corporation based inTokyo, JAPAN
The FA-M3 is designed and best known for its speed so it's only natural that the new series be named FA-M3V, where V stands for "Vitesse", which means speed in French. From day one, FA-M3 has relentlessly pursued higher speeds as the most effective means to solving customer challenges. Over time, this has evolved into the High Speed IPRS (Instruction, Processing, Response and Scan) design ...
Manufactured by:Yokogawa Electric Corporation based inTokyo, JAPAN
High reliability and high speed are essential for the systems that control your critical processes. The dual redundant model of the field control node (FCN) autonomous controller ensures that these processes continue without interruption even when a module is replaced. For more information: ...
Manufactured by:Yokogawa Electric Corporation based inTokyo, JAPAN
e-RT3 is a controller developed to be incorporated into various manufacturing equipment and production equipment. It has both PLC and board strengths. Our controller is a new concept controller developed to be incorporated into various manufacturing equipment and production ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-120 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Digital data are transmitted via the industry-standard Modbus RTU protocol, supporting long-distance connections to computers, programmable logic controllers (PLCs), Building Automation Systems (BAS), SCADA systems, and data loggers. An SDI-12 version is also ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon MS-150 is a preconfigured automatic weather monitoring station that requires no programming or specialized installation services. MS-150 is shipped with control module (data logger) with solar panel, and the following sensors: wind speed and direction (with wind gust and direction averaging), barometric pressure, relative humidity, ambient temperature, solar sensor, ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON’s Jordan Technologies pioneered and holds the patent on vapor recovery continuous emission monitors (CEMs). Manufactured with high-quality components, and fully compliant with the US EPA 40 CFR Part 63 Subpart BBBBBB, our CEMs are built to withstand the roughest field conditions. AEREON guarantees our monitors to be reliable and ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. AEREON's RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust flow rates. ...
Manufactured by:Airwave Electronics Ltd. based inDidsbury, ALBERTA (CANADA)
The Protec II (SAS) is a 'Stand Alone' remote sensing system for toxic gases. it is intended to be placed in the area where leaks of these potentially dangerous gases are likely to occur. The protec II sensors measures the levels of these gases, activates alarms based on the concentration, and can transmit a signal to the appropriate control ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's halogenated thermal oxidizer systems are designed to handle hazardous halogenated streams produced from various chemical processes in a safe and effective manner. Systems are designed to maintain high destruction efficiency of the compounds with an effective high chamber temperature and residence ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Globe Temperature (GT) sensor measures the temperature of the environment in a way that mimics how humans and animals perceive heat. GT absorbs heat from radiation such as the sun, air, and ...
Manufactured by:Infratech Corporation based inWhitecourt, ALBERTA (CANADA)
Reduction Capacity:* From 40 kg/hr [88 lbs/hr] to 75 kg/hr [165 lbs/hr]. Shipping Dimensions: 5,029 [16’–6”] long x 2,134 [7’–0”] wide x 3,000 [9’–10 1/8”] high (stack shipped separately). Weight: 10 000 kg [22 000 lbs]. Approximate Diesel Fuel Usage: 15.0 – 25.0 L/hr [4.0 – 6.6 ...
Manufactured by:Infratech Corporation based inWhitecourt, ALBERTA (CANADA)
Reduction Capacity:* From 175 kg/hr [385 lbs/hr] to 300 kg/hr [660 lbs/hr]. Shipping Dimensions: 7,010 [23’–0”] long x 2,743 [9’–0”] wide x 3,883 [12’–8 7/8”] high (stack shipped separately). Weight: 19 000 kg [41 800 lbs]. Approximate Diesel Fuel Usage: 25.0 – 40.0 L/hr [6.0 – 10.6 ...
Manufactured by:Nomadic Systems Inc. based inCalgary, ALBERTA (CANADA)
In addition to advanced sewage treatment systems, NOMADIC is now offering potable water treatment systems. These systems can be custom manufactured, and they are available in standard ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct thermal oxidizer (1400° F - 1800° F). Destruction ...
Manufactured by:Infratech Corporation based inWhitecourt, ALBERTA (CANADA)
Reduction Capacity:* From 80 kg/hr [176 lbs/hr] to 150 kg/hr [330 lbs/hr]. Shipping Dimensions: 6,096 [20’–0”] long x 2,438 [8’–0”] wide x 3,458 [11’–4 1/8”] high (stack shipped separately). Weight: 12 500 kg [27 500 lbs]. Approximate Diesel Fuel Usage: 20.0 – 35.0 L/hr [5.3 – 9.2 ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel consumption for economical operation. Primary advantage of the unit ...
Manufactured by:Enerflex Systems Ltd based inCalgary, ALBERTA (CANADA)
Exterran’s Glycol Dehydration Unit is a reliable, efficient system for removing water from natural gas wellstreams in order to meet typical pipeline and process specifications. Multiple stages of removal are contained on a single skid-mounted unit, giving you a wide range of options and flexibility to configure the system to your specific ...
Manufactured by:Infratech Corporation based inWhitecourt, ALBERTA (CANADA)
Reduction Capacity:* From 16 kg/hr [25 lbs/hr] to 30 kg/hr [66 lbs/hr]. Shipping Dimensions: 3,658 [12’–0”] long x 1,981 [6’–6”] wide x 2,840 [9’–3 13/16”] high (stack shipped separately). Weight: 7000 kg [15 400 lbs]. Approximate Diesel Fuel Usage: 7.0 – 13.0 L/hr [1.8 – 3.4 ...